Red Hat DEVICE-MAPPER MULTIPATH 5.2 Manual do Utilizador descarregar pdf (Página 24)

5.1.1.3 Enabling the device-mapper multipath

Enable the device-mapper multipath, using the following commands.

# insserv boot.multipath multipathd

# chkconfig multipathd on

# chkconfig boot.multipath on

# /etc/init.d/boot.multipath start

# /etc/init.d/multipathd start

One of the following messages may be displayed after the "/etc/init.d/boot.multipath start" command is exe-

cuted in an environment that has many devices connected.

Setup multipath targets/etc/init.d/boot.multipath: line 102:

/sys/block/dm-*/uevent: No such file or directory

timeout waiting for devices failed

Setup multipath targetstimeout waiting for devices failed

If one of these messages is displayed, wait for about five minutes, and then execute the "/etc/ init.d/

boot.multipath start" command again.

5.1.1.4 Rebooting the Linux Server

Reboot the Linux server.

Example:

# shutdown -r now

Chapter 5 For SUSE Linux Enterprise Server 10

5.1 For SUSE Linux Enterprise Server 10 SP3 or Later

FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection-

(Fibre Channel/FCoE/iSCSI/SAS) for Linux

P3AM-3912-21ENZ0

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 30 31

Sem comentários

Red Hat DEVICE-MAPPER MULTIPATH 5.2 Manual do Utilizador Página 24