Appendix F. Additional Information for S/390 and zSeries Users 57
The configuration of /dev/md0 can be examined more closely using the command mdadm --detail
/dev/md0 to verify that it is, in fact, a multipath device:
/dev/md0:
Version : 00.90.00
Creation Time : Tue Mar 2 10:56:37 2004
Raid Level : multipath
Array Size : 3905408 (3.72 GiB 3.100 GB)
Raid Devices : 1
Total Devices : 4
Preferred Minor : 0
Persistence : Superblock is persistent
Update Time : Tue Mar 2 10:56:37 2004
State : dirty, no-errors
Active Devices : 1
Working Devices : 4
Failed Devices : 0
Spare Devices : 3
Number Major Minor RaidDevice State
0 8 49 0 active sync /dev/sdd1
1 8 17 1 spare /dev/sdb1
2 8 33 2 spare /dev/sdc1
3 8 1 3 spare /dev/sda1
UUID : 4b564608:fa01c716:550bd8ff:735d92dc
Events : 0.1
Another feature of mdadm is the ability to force a device (be it a member of a RAID array or a
path in a multipath configuration) to be removed from an operating configuration. In the following
example, /dev/sda1 is flagged as being faulty, is then removed, and finally is added back into the
configuration. For a multipath configuration, these actions would not affect any I/O activity taking
place at the time:
# mdadm /dev/md0 -f /dev/sda1
mdadm: set /dev/sda1 faulty in /dev/md0
# mdadm /dev/md0 -r /dev/sda1
mdadm: hot removed /dev/sda1
# mdadm /dev/md0 -a /dev/sda1
mdadm: hot added /dev/sda1
#
F.4. Configuring IPL from a SCSI Device
Anaconda (the installation program) supports the direct installation of Red Hat Enterprise Linux to
SCSI devices. This section includes information on how to IPL from a SCSI device within z/VM.
F.4.1. IPL the SCSI Disk
To IPL the SCSI disk, we provide the WWPN and LUN to the machine loader using the SET LOADDEV
command.
set loaddev portname 50050763 00c18154 lun 57190000 00000000
Ready; T=0.01/0.01 15:47:53
q loaddev
PORTNAME 50050763 00C18154 LUN 57190000 00000000 BOOTPROG 0
BR_LBA 00000000 00000000
Comentários a estes Manuais